Tag Archives | videos

Thread Tips and Tricks.

Collaboration with Sew Fine Thread Gloss . Carolyn Friedlander

With the launch of my recent collaboration with Sew Fine Thread Gloss, I thought it might be handy to throw some thread tips into a blog post. There are some super easy things that can make a huge difference.

  1. Work the thread in the proper direction, which is the direction that it is spun. Doing so will result in fewer knots. This might sound tricky and overly technical, BUT it’s super easy in practice and can just be a matter of creating a new habit. Here’s what you need to do; if you’re right-handed, knot the end of thread that you cut, and if you’re left-handed, knot the first end off the spool (or NOT the end that you cut). Keep in mind that this trick works with factory-wound spools and not any bobbins that you have wound yourself (because they’ve been re-wound in the opposite direction).
  2. How’s that thread length? If you’re having problems with knots, and you’ve already adjusted your knotting routine (see #1), then you might consider cutting a shorter length of thread. A shorter length might also be needed if your threads are starting to shred or thin out in the middle while you work. There’s always a balance between getting the maximum length of thread so that you’re not stopping and starting unnecessarily, BUT not too long that it’s wearing out the thread or getting knotty from all of the wear and excess length. Handwork is easily adaptable thanks to our ability to adjust the many variables in the process. Length is an easy adjustment to tinker with until you find what works best for you, the project and the materials. In general, I shoot for a thread length of 18″-24″.
  3. Work that thread conditioner! Yep, it makes a difference. I used to go back and forth on the subject–mostly because it was easy to get lazy over an extra step, but after so much handwork, I’m firmly on the side of using thread conditioner. While it is an extra step, doing it pays off in ease of use which in the end makes me feel like I’ve saved time and loads of frustration. My thread conditioner preference is the beeswax-based Sew Fine Thread Gloss, and I have some special collaborative scents available in the shop that you can find here.
  4. Tools and materials matter, especially when it comes to handwork. Always use the best tools and materials that you can. The reason I decided to stock some of my favorite scissors, thread and thread conditioner is because I believe in them, and I know how much they’ve helped me.

aurifil 80wt appliqué thread set . carolyn friedlander

Oh, and I just created a couple of quick thread knotting videos if you’re interested. First up is a Garment Knot, which I like using after conditioning my thread and before starting my appliqué.

And if you’re up for another good knot, here’s how you make a Quilter’s Knot.

Do you have any favorite thread tips? Feel free to share!

Comments: 13 | Leave a comment


Adventures on YouTube.

Lately, I’ve been taking on some new things…like my most recent adventures on YouTube as of this morning. (Super super hot off the press…)

carolyn friedlander on YouTube

Warning: I still don’t have much of a clue what I’m doing, but I think it’ll be fun to figure it out. I’m hoping my YouTube channel will be a good place to add some of the video-ish content that I’ve been generating.

It all started with a request for a video from the folks with the Dallas Book Festival–an event that I’m delighted to be participating in this weekend on Saturday, April 30, 2016. Putting together the short video (here) was a great little challenge for me. It’s pretty basic, but the newness of it still made for a good challenge.

Carolyn Friedlander_Dallas Book Festival

If you’re in Dallas, I’d love to see you there! I’m also teaching a workshop at Urban Spools following my presentation at the event.

Comments: 3 | Leave a comment


Site by Spunmonkey.